TheRadioFlyer

Put a stop to that pesky hyperflash from LED bulbs with Radioflyer's Hyperflash Harness. Safer than load resistors and easier to install.

Normally $65, now til the end of January, just $50!

Order yours here:

http://www.shop.radioflyerinnovation...arness-027.htm

Yellow03Z06

Just ordered mine

TheRadioFlyer

thanks for the order.

TheRadioFlyer

ttt

TheRadioFlyer

bump of the morning

Yellow03Z06

Just got it today! Fast shipping

Where can I find install instructions?

TheRadioFlyer

http://forums.corvetteforum.com/c5-g...y-kamil-d.html

Yellow03Z06

Thanks!

duramaxsky

Will this work if you only install LEDs in the front signals?

TheRadioFlyer

Yes.

TheRadioFlyer

ttt

duramaxsky

Just ordered mine

TheRadioFlyer

Negative. Only for the turn signals and LED tail lights NOT equipped with resistors (the HALO tail lights have built-in resistors)

Z06ufgrad2002

Will this harness fix the hyperflash problem with LED lights installed just in the rear of the car?

I installed a set of Halo LEDs rear lights from JWmotoring and now having the turn signal hyperflash problem.

TheRadioFlyer

yes, the harness will fix that problem.

J S Machine

Will this fix the regular turn signal intermitent flash issue like the others do?

I currently have no brake lights and the hazard switch is the main suspect.

TheRadioFlyer

I cannot guarantee that. Have you checked the brake light fuse (gotta ask)

J S Machine

See here:

http://forums.corvetteforum.com/c5-t...tch-issue.html

TheRadioFlyer

Personally I cannot verify that this will work as I have not done it myself. According to posts, it seems like it would work.

If you're willing to try, I would give you a $20 discount off the harness to experiment. If it works, I can then market the harness as a fix for your issue as well.

duramaxsky

I installed my LEDs in the front today. Sure enough it had hyperflash. I then installed the harness and all is well. This is a great and easy to install kit. Is the box a relay or a 3 prong flasher? My curiosity has the best of me. My housings are not yet melted on top so the LEDs should prevent that. The previous owner pulled the DRL relay but I want them to work. A black car can be hard to see.