0Andrew6@TheDoubleAA

This is ONLY available through"TheDoubleAA.com". We have spent about a year to make sure everything was absolutely perfect from fitment all the way to ease of install.

For the next 10 days we can guarantee free shipment to you in time for Christmas and offering "FREE" customizing.

INTRODUCTORY PRICING: $399

- How hard is it to install?
This has a similar design to the partitions available and just slides right into place. For the lighting you remove the panel on the back (4 grommets) and tie in power from tail lights and done... Should be a less than 15 minute job.

- Will my top fit in with this installed?
Yes, it was specifically designed so that the tops could be stored with the Glow Plate in place

- I have a Vette bin, will this work together?
Yes. The fitment is perfect and slides right into place.

- What models of vehicles will this fit?
This will fit all coupe style models including ZR1, Z06, Grand Sport Coupes and Coupes.

- What all options are available?
Everything that is currently offered for the convertible wind restrictor will be available for the Coupe Glow Plate Wind Restrictor including:
Accessories for Wind Restrictor
Brake Lamp Module with Dimmer ***** - (Works with the brake lights to increase intensity and decrease when you touch the brakes, also comes with a 9v battery system to run when the car is off or battery disconnected)
Dimmer Control Module (remote control brightness, dimmer and on/off controller)
12V Power Plug (cigarette lighter plug)
on/off switch
Battery Pack

0Andrew6@TheDoubleAA

0Andrew6@TheDoubleAA

The FREE custom graphics are an additional savings of 105.00

0Andrew6@TheDoubleAA

I appreciate all the emails, phone calls, Texts, PM's etc... We now have it listed on the website, sorry for not getting this done sooner. I am just very excited about this and it's probably one of the coolest things I've ever seen, so when we got the go ahead for it I had to share it.

Something I forgot to mention before, there were a limited amount made so first come first serve.
Click here for a direct link:
http://thedoubleaa.com/cart/index.ph...roducts_id=199

0Andrew6@TheDoubleAA

The first 15 people to buy them get a special surprise

0Andrew6@TheDoubleAA

8 days left!

0Andrew6@TheDoubleAA

Some other Custom designs previous customers have done:

0Andrew6@TheDoubleAA

6 days left

0Andrew6@TheDoubleAA

Due to the surprising demand after the next few we may not be able to have more ready before Christ mas but will do our best!

For the next 5 days we will still over Free shipping and Free custom Graphics.

0Andrew6@TheDoubleAA

0Andrew6@TheDoubleAA

Orders received!!!! Congratulations to all of you that have got in on this wonderful new promotion.
We’re filling the orders just as quickly as we can in an attempt to get all orders shipped out in time for Christmas. Please call or write ASAP if you want to get your orders in line and get in on this special.
This introductory price will only last through 12/10 midnight, same with the free graphics and free graphics assistance! Don't forget to ask about the free gift!

This is the Grandsport one a customer ordered shipped out yesterday!

0Andrew6@TheDoubleAA

I greatly appreciate all the orders and they will ship ASAP. This special ends at midnight tonight.

0Andrew6@TheDoubleAA

Pictures of a customers custom Glow Plate partition.

0Andrew6@TheDoubleAA

Due to holidays, vacations etc... there will be a 4 to 6 week wait on all orders of Wind Restrictors for Convertibles and Glow Plates for the Coupes.

0Andrew6@TheDoubleAA

Carnac

Seems strange that there have been lots of orders, but no comments by any members...

corvette marvin

Is the wind restrictor glow plates still available for C/6 coupes, what is the current price and how long for wait time

0Andrew6@TheDoubleAA

It is available still for coupes, zr1, z06 and grandsport coupes. Price is $399 and comes with your choice of custom etching and choice of color of lighting.

It's a pretty darn easy install too. Unscrew the 4 locks on the backing carpet and tap power from the cargo light in the rear and your done. It took me under 10 minutes from start to finish to do this.

As for wait time, it is generally 3 to 4 weeks but I can see about getting a rush on it if you want sooner.

0Andrew6@TheDoubleAA

Just how things go. I sell alot on facebook and on here to members but generally never post anything. I have quite a few "one off" products that I've made special for customers who've never posted pictures or wait 9 monthes to a year to post pictures.

azZ06Mike

I saw one of these in person last week. Awesome awesome awesome!!!!