mrpacecar

looking for a power antenna w/cb my is not working it has power but will not go or down

doctorgene

If it sounds like it is working, it probably just needs new Antenna Mast Repair Kit. It is very easy to install. Have a great one. Gene

srs244

over time the spline dries out and cracks into pieces. the repair (as drgene said) is very straight forward and pretty simple to accomplish. do you actually hear the motor trying to raise or lower? if so, you are in good shape with the mast repair kit.

mrpacecar

the motor go on when you turn the radio on how do you get the antenna off the weel is in the way

doctorgene

Yes Sir; first, set car up on stands, Unhook battery. You have to remove the driver's side Exhaust piping & muffler, sometimes you have to have a new stainless steel band, or two, to reinstall this piping. It does help to remove the wheel. The wire loom plug is behind the rear driver's side rear speaker. Gently pushing out the rubber wire plug, to the outside.. Now look at the bolts holding it to the body, will help if you spray Wd or another brand on all bolts, first, this will ad in removing them. Buy A Corvette shop Manual from or made by Helms. This will give you all the info. you will need to do this job. Be Safe, Have a great day. Gene

mrpacecar

thanks for the help lou

MN81C3

Are you still looking for a AM/FM/CB antenna? I have a spare.

oldalaskaman

found one

leedid1406

Do you still have your spare antenna?
I'm looking for one

egilarve

Hi,
Can somebody help me with a power antenna for a 1978 Corvette Pace Car. It's a AM / CB radio.

Indigoblue

still looking for a antenna... a 1978 am/fm for my pace car...if you have one for sale please pm me
thanks

Nick922

I would like to make an offer contact me at nicky.riccio@gmail.com

Thanks,
Nick

doctorgene

Yes Sir; I have a AM / FM / CB radio w/Out the antenna. The antenna's are more money, than the radios, or just as much. I need an antenna for a 1982 W/ CB AM / FM Or sell the radio. I have the divider that came with it. It was working when I took it out. Thank's Gene

VETTEHEAD9

Trying to find the mast cable which is all one piece with the mast is not going to be easy. Don't bother going to GM you won't find it and can't get it in repo. Once you have the antenna on the bench, you have to remove the grayish colored plastic cover, 4 screws. If the cover is black the antenna has been replaced already. It is sealed with a whitish colored silicone as a sealer for the motor. You have to get the broken nylon mast section out, or it will jamb the new mast. The good news is I have found that sometimes in icy weather ice forms around the bezel on top of the rear fender and the mast won't work. If you turn the radio off with ice around the bezel it may have just jumped the track on the motor winding pulley inside and its not broken. Slim chance but I have seen that before. You can get a 79 mast section only but the tip is different than 78, and the 79 comes with what looks like a fishing hook on the end and has no way to attach to the motor in the 78 antenna.I always wanted to try the 79 style just cutting off the fishing hook but haven't tried that yet so I can't say that would work.If you don't find one I have quite a few here standard and CB.

Tomjacksonn@live.com

I am looking to purchase a complete 1978 CB power antenna, any help would be great.
Tomjacksonn@live.com
Thanks

mavcat17

reviving an old thread, sorry !

anyone have a power antenna w/cb for an 82?

VETTEHEAD9

Are you looking for original equipment ? I think that is all that i would have. If your interested send me a PM and over the weekend I'll look, Joe

vettebuyer6369