Peak speed shop
#1
Instructor
Thread Starter
Member Since: Jun 2010
Location: Spring Lake Michigan
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Peak speed shop ported intake vs Fast
MY last mod on my LS2-A6--will be the intake manifold, everything else is done, cam--headers--cai--cnc 243 heads--headers----with Peak , for $500 incl. shipping you can get your stk intake & throttle body done---$850 for a new Fast------what's everybody's opinion ??? RWHP going to be the same ?? Fast intake with stk trottle body ??? Is it worth saving --$350 ??? THANKS !!!
Last edited by musicman2; 09-09-2011 at 05:09 PM.
#2
Safety Car
For the LS2, the FAST is a worthwhile investment. Porting the LS2 manifold provides solid gains, but it starts from a crappy manifold. If you have money, get the FAST. It should be worth at least another 10 HP on a H&C car.
#3
Tolero Apto Victum
I am in the same boat, I have done just about as much as I can to my 07 Z51 A6. So now I am looking at having the intake ported, maybe from http://www.peakspeedshop.com/ If you can OP, do a before and after dyno so that we can see how much HP/TQ you gained.
Good Luck!
Good Luck!
#5
I have a radical porting one on her 05 and it was an improvement
i didn't want the LSX cause of it being an automatic car and pretty much stays in the lower rpm range especially when cruising
i forgot offhand where i got it from, but it looked very nice too
i also got the ported TB, but not sure if its really worth anything (from what i have heard from others)
i didn't want the LSX cause of it being an automatic car and pretty much stays in the lower rpm range especially when cruising
i forgot offhand where i got it from, but it looked very nice too
i also got the ported TB, but not sure if its really worth anything (from what i have heard from others)
#6
Tolero Apto Victum
I have a radical porting one on her 05 and it was an improvement
i didn't want the LSX cause of it being an automatic car and pretty much stays in the lower rpm range especially when cruisingi forgot offhand where i got it from, but it looked very nice too
i also got the ported TB, but not sure if its really worth anything (from what i have heard from others)
i didn't want the LSX cause of it being an automatic car and pretty much stays in the lower rpm range especially when cruisingi forgot offhand where i got it from, but it looked very nice too
i also got the ported TB, but not sure if its really worth anything (from what i have heard from others)
I also spend most of my time in the 2,000 to 3,500 rpm range while DD.
#7
Former Vendor
Intake Manifold Porting Special
Peak Speed Shop is running a special on porting intake manifolds and throttle bodies to Corvette Forum members through January 15th, 2012. Here is a link to the thread:
http://forums.corvetteforum.com/c6-t...y-porting.html
http://forums.corvetteforum.com/c6-t...y-porting.html