3946074 factory or over the counter?
#1
Drifting
Thread Starter
Member Since: Jul 2000
Location: Melbourne Australia
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
3946074 factory or over the counter?
Is there any real way to tell factory fitted heads compared to over the counter items?
I have a pair which have some stampings(some numbers and a big HC on each end)on the end and appear to have had 2 studs cut down on each head (screwed into intake ports from the block mating surface)
Dates are 7\3\69 and 2\28\69
cheers
Jim
I have a pair which have some stampings(some numbers and a big HC on each end)on the end and appear to have had 2 studs cut down on each head (screwed into intake ports from the block mating surface)
Dates are 7\3\69 and 2\28\69
cheers
Jim
#2
Race Director
Is there any real way to tell factory fitted heads compared to over the counter items?
I have a pair which have some stampings(some numbers and a big HC on each end)on the end and appear to have had 2 studs cut down on each head (screwed into intake ports from the block mating surface)
Dates are 7\3\69 and 2\28\69
cheers
Jim
I have a pair which have some stampings(some numbers and a big HC on each end)on the end and appear to have had 2 studs cut down on each head (screwed into intake ports from the block mating surface)
Dates are 7\3\69 and 2\28\69
cheers
Jim
#4
Team Owner
I don't think anyone wanting a set of those heads would care if they came from the factory or from the dealer. If they are in good condition, they should be worth some money.