The best bonding adhesive to use
#1
Burning Brakes
Thread Starter
The best bonding adhesive to use
Fifteen years ago, when I made extensive fiberglass repairs to a 1970 Corvette, I used a bonding adhesive called "Super Corvette Fill & Bonding Adhesive. This product was marketed by The Corvette Shop in Southfield, Mich. It was great stuff, easy to use, and could be used as a surface filler also. Does anyone know if this product is still available, perhaps through another supplier, and if not, what bonding adhesive do you recommend?
Fred
Fred
#2
Le Mans Master
Have you looked for the Evercoat products
Most local autobody supply shops carry the Evercoat Corvette Bonding adhesives, one product for fiberglass and another adhesive for SMC panels. Ecklers and Corvette Image both sell bonding adhesives. The next step up is the Lord Fusor bonding products which most supply shops carry too, a lot more spendy and the gun costs like $40 by itself.
#3
Burning Brakes
Thread Starter
Originally Posted by Scott Marzahl
Most local autobody supply shops carry the Evercoat Corvette Bonding adhesives, one product for fiberglass and another adhesive for SMC panels. Ecklers and Corvette Image both sell bonding adhesives. The next step up is the Lord Fusor bonding products which most supply shops carry too, a lot more spendy and the gun costs like $40 by itself.
#4
Le Mans Master
Same holds true for Evercoat and
the Ecklers and the Corvette Image adhesives. They are all Polyester resin based products for fiberglass and are recommended for high build up areas. Evercoat also makes a filler just for Corvette fiberglass.
#5
Race Director
I liked Ecklers better than Evercoat, but Evercoat seems a little less full-bodied and is useful for forcing between panel joints that have become un-bonded, to bond them again.
#6
Drifting
Longbros, I just check the gallon of Vette Bond II bonding adhesive I just received from Corvette Central. The label on it states it is from the Corvette Shop, but out of some place in New York. It says it is for filling and bonding.
#7
Melting Slicks
I uesd Vette Bond, I am not sure if there was a number after the name, but either way the stuff stuck and stuck well. (bonded a hood back together).
oWEN
oWEN