How does a line lock work?
#3
Melting Slicks
Thread Starter
OK, cool. Here's a link I found. Now for the stupid question, can a line lock also be used as a parking brake?
#4
Race Director
No. Well sort of. The selonoid is only designed to work for a little while. If you left it on it would burn itself out. It is also not good to leave hyd pressure on for long periods of time. It will leak down some and your "parking brake" will no longer be parking but rolling. It is designed to be used for short periods of time 10 to 15 seconds.
#5
Melting Slicks
Thread Starter
Originally Posted by Gordonm
No. Well sort of. The selonoid is only designed to work for a little while. If you left it on it would burn itself out. It is also not good to leave hyd pressure on for long periods of time. It will leak down some and your "parking brake" will no longer be parking but rolling. It is designed to be used for short periods of time 10 to 15 seconds.
#6
Team Owner
Main purpose is to lock front wheels while you a do a burnout at the drag strip, but it also can be used instead of your parking brake for making graceful uphill starts at a stop sign. (without any backward drift).
Here is my writeup:
http://forums.corvetteforum.com/show..._id=119&arch=1
Here is my writeup:
http://forums.corvetteforum.com/show..._id=119&arch=1
#7
Drifting
Line un-locks?????
Guys,
As a keen drag racing fan, I've seen my fair share of cars fitted with line locks, but for a long while I've been thinking that they're designed "bass ackward". Let me explain. When they are fitted as directed, you plant your foot on the brakes, locking all FOUR brakes on. You flick the switch and the solenoid closes a valve on the front brake circiut and the brake fluid does not flow from the front brakes back to the master cylinder when you take your foot off the brake. Of course, the rear brakes release and the wheels spin when you hit the gas.
Trouble is, if the car goes sideways and you need to correct, the front wheels are locked on and there is not a lot you can do but turn the wheel and hope (!!!!) it straightens up. You can release the transbrake but, as soon as you touch the brakes again, the rear wheels will slow down as well. Not ideal!
However, what if the line lock was inserted in the REAR brake system? When disengaged, all four brakes would apply when you touched the pedal, but when engaged, it would prevent fluid from reaching the rear brakes. This way you could get the tyres spinning, but you could modulate the speed of the car by using the brake pedal that operated the FRONT WHEELS ONLY. This would appear to be a far better way to use a line lock. Obviously, we're talking rear wheel drive!! Anyone got any thoughts on this?
Regards from Down Under
aussiejohn
As a keen drag racing fan, I've seen my fair share of cars fitted with line locks, but for a long while I've been thinking that they're designed "bass ackward". Let me explain. When they are fitted as directed, you plant your foot on the brakes, locking all FOUR brakes on. You flick the switch and the solenoid closes a valve on the front brake circiut and the brake fluid does not flow from the front brakes back to the master cylinder when you take your foot off the brake. Of course, the rear brakes release and the wheels spin when you hit the gas.
Trouble is, if the car goes sideways and you need to correct, the front wheels are locked on and there is not a lot you can do but turn the wheel and hope (!!!!) it straightens up. You can release the transbrake but, as soon as you touch the brakes again, the rear wheels will slow down as well. Not ideal!
However, what if the line lock was inserted in the REAR brake system? When disengaged, all four brakes would apply when you touched the pedal, but when engaged, it would prevent fluid from reaching the rear brakes. This way you could get the tyres spinning, but you could modulate the speed of the car by using the brake pedal that operated the FRONT WHEELS ONLY. This would appear to be a far better way to use a line lock. Obviously, we're talking rear wheel drive!! Anyone got any thoughts on this?
Regards from Down Under
aussiejohn
#8
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Originally Posted by aussiejohn
Guys,
As a keen drag racing fan, I've seen my fair share of cars fitted with line locks, but for a long while I've been thinking that they're designed "bass ackward". Let me explain. When they are fitted as directed, you plant your foot on the brakes, locking all FOUR brakes on. You flick the switch and the solenoid closes a valve on the front brake circiut and the brake fluid does not flow from the front brakes back to the master cylinder when you take your foot off the brake. Of course, the rear brakes release and the wheels spin when you hit the gas.
Trouble is, if the car goes sideways and you need to correct, the front wheels are locked on and there is not a lot you can do but turn the wheel and hope (!!!!) it straightens up. You can release the transbrake but, as soon as you touch the brakes again, the rear wheels will slow down as well. Not ideal!
However, what if the line lock was inserted in the REAR brake system? When disengaged, all four brakes would apply when you touched the pedal, but when engaged, it would prevent fluid from reaching the rear brakes. This way you could get the tyres spinning, but you could modulate the speed of the car by using the brake pedal that operated the FRONT WHEELS ONLY. This would appear to be a far better way to use a line lock. Obviously, we're talking rear wheel drive!! Anyone got any thoughts on this?
Regards from Down Under
aussiejohn
As a keen drag racing fan, I've seen my fair share of cars fitted with line locks, but for a long while I've been thinking that they're designed "bass ackward". Let me explain. When they are fitted as directed, you plant your foot on the brakes, locking all FOUR brakes on. You flick the switch and the solenoid closes a valve on the front brake circiut and the brake fluid does not flow from the front brakes back to the master cylinder when you take your foot off the brake. Of course, the rear brakes release and the wheels spin when you hit the gas.
Trouble is, if the car goes sideways and you need to correct, the front wheels are locked on and there is not a lot you can do but turn the wheel and hope (!!!!) it straightens up. You can release the transbrake but, as soon as you touch the brakes again, the rear wheels will slow down as well. Not ideal!
However, what if the line lock was inserted in the REAR brake system? When disengaged, all four brakes would apply when you touched the pedal, but when engaged, it would prevent fluid from reaching the rear brakes. This way you could get the tyres spinning, but you could modulate the speed of the car by using the brake pedal that operated the FRONT WHEELS ONLY. This would appear to be a far better way to use a line lock. Obviously, we're talking rear wheel drive!! Anyone got any thoughts on this?
Regards from Down Under
aussiejohn
#11
Team Owner
technically, the linelock doesn't apply pressure to the front brakes.. What it does is to lock in pressure.. To activate the linelock you'll have to step on the brake first, then push the linelock button and hold it. Do the burnout and when you are done, release the button and that'll release the front brakes..
#12
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Originally Posted by GrandSportC3
technically, the linelock doesn't apply pressure to the front brakes.. What it does is to lock in pressure.. To activate the linelock you'll have to step on the brake first, then push the linelock button and hold it. Do the burnout and when you are done, release the button and that'll release the front brakes..
#13
Team Owner
Originally Posted by norvalwilhelm
You will find you can push the line lock and then apply pressure and it will work the same way. Pressure passes one way through the line lock and gets trapped from returning. This is a safety feature to prevent you from locking OUT your brakes.
#14
Instructor
Member Since: Feb 2004
Location: Ravenna Ohio
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
For those drag racers i was thinking why couldn't you put in a brake prportioning valve that you turn by hand.. Have it pop out of carpet or whatever near the drive shaft tunnel. Pull up to burn out box turn valve closed then when you hit your brake only your front brakes receive the pressure. Do your burn out and lossen up the valve. 70% of braking is front tires and if you are on the drag strip all the time then proportioning isn't that critical or you can proportion it the way you want and count the number of turns? BAM
what do you think. I've always wondered about that and a lot cheaper than a line lock
what do you think. I've always wondered about that and a lot cheaper than a line lock
#18
Former Vendor
Member Since: Nov 2005
Location: Mounds View Minnesota
Posts: 683
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by JDRez42
For those drag racers i was thinking why couldn't you put in a brake prportioning valve that you turn by hand.. Have it pop out of carpet or whatever near the drive shaft tunnel. Pull up to burn out box turn valve closed then when you hit your brake only your front brakes receive the pressure. Do your burn out and lossen up the valve. 70% of braking is front tires and if you are on the drag strip all the time then proportioning isn't that critical or you can proportion it the way you want and count the number of turns? BAM
what do you think. I've always wondered about that and a lot cheaper than a line lock
what do you think. I've always wondered about that and a lot cheaper than a line lock
Besides, on a Vette you should have both a line lock and a prop valve...
#19
Race Director
Originally Posted by Corvette Engineering
Proportioning valves don't shut off completely, They just reduce the pressure at a maximum of 1000psi. So you'd sill have brake drag on the rear tires.
Besides, on a Vette you should have both a line lock and a prop valve...
Besides, on a Vette you should have both a line lock and a prop valve...