C6Z06 with QM600 Cam dyno 540RWHP
#1
Instructor
Thread Starter
Member Since: May 2007
Location: Atlanta GA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
C6Z06 with QM600 Cam dyno 540RWHP
Hi All,
Does anyone know how fast a 2006 C6 Z06 with QM600 cam dynoing 540RW complete the 1/4 mile? I know the E.Ts vary but more interested in the trap time. Does it surpass a stock ZR1?
Thanks in advance.
Sunrise
Does anyone know how fast a 2006 C6 Z06 with QM600 cam dynoing 540RW complete the 1/4 mile? I know the E.Ts vary but more interested in the trap time. Does it surpass a stock ZR1?
Thanks in advance.
Sunrise
#2
Le Mans Master
540 is about what a stock ZR1 dynos. On a cooler day, the ZR will probably have the advantage with greater power in the lower rpm range. The 06 would equal it at peak, but the ZR would have it every where else. On a hot day, it might be a different story. Both would lose power, but the ZR would lose more.
#3
Supporting Vendor
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
It's too hard to tell what it will trap. It depends on if you can drive or not. If you can drive and it hooks, then it should trap 130-132 ish