Thanks Josh and Jesse for a superb job! You were right about the kid on a christmas morning. Mine came 3 months sooner! Im ear to ear smile and trying my best to lay off my right foot. Again thanks so much.

Josh, will you please let me know when the shipment to JHR in Mooresville leaves your facility. Also, since I will be running headers does that change the pulley size?

Josh,

I was looking at your numbers and I'm definitely lacking something in my tune. I have a built 2006 M6
Vette with a built .408, stock ported heads, Dallas Performance Direct Drive with OD 8 Rib, 3.8 pulley (I think..but pretty sure), large blower cam, in-tank twin fuel pump w/KB BAP and V-3 Si trim. I'm currently sitting at 660whp w/90F ambient temps. Should be much more.

This is the 2nd blower. A few weeks ago while on the dyno, the old V-3 Si trim cannibalized itself on the dyno. During the last pull, it made 691whp. Since we've installed the new blower, whp is way down. Any ideas I can pass on to my tuner?

My email is hymanjr@gmail.com

Thanks!

Josh, he its Eric in Iowa, we talked on the phone last week & you wanted me to email you what we talked about with the YSI 8rib 2nd drive etc, i just wanted to make sure you got it as i've not received anything back from you. I'm not in a hurry, I just wanted to make sure you got that email. Thanks!

BTW, tuner kit (ysi, 8 rib)
Thanks!

My name is Carlos Sepulveda and I'm an Air Force veteran that came back from the desert with a dream of building my C6 Z06 with a A&A S/C kit.
I missed your sale on the corvette forum because of beeing deployed and I wanted to know how much would be your kit with a YSI and 8 rib kit upgrade (I do have a LME F/I sleeved 427 build engine)
Thank you for you help,
Carlos.
787 603-3030
2006 C6 Z06

Thank you Frank for quick reply.

Hi,
My Spec 3+ clutch is starting to slip in my 98 Corvette. I purchased the car with that clutch. My Corvette has on pump gas, dynoed at 767 hp and 640 ft. lbs torque to the wheels. I know nothing about clutchs. It is mainly a street car but could see some track time in the future. What clutch would work best for me. What other parts do I need to buy? I shopped around tranny shops in my area, Cedar Rapids Iowa, and got quotes of $600 to $1100 to install the clutch. Does that seem about right?
Thanks for your time,
Jay
talonawdtsi@mchsi.com