Are you still doing custom Chips?i have a 89 6speed, zz4 motor, tpis big mouth intake, tpis large tube runners,52mm throttle body,24lbs injectors.long tube headers no cats no precats all emissions removed from motor.

Hey I wanna know if you're still doing the bolt in SRA kits for c4's.

Jesse do you still offer the 4 link/ solid axle set-up for C-4's? I just bought a 92 lt-1 6 spd. I have another question you might be able to answer. What are the differences between say a Dart aftermarket block and the stock lt1. Obviously 2pc rear main seal and no opti spark. Any sensor bosses? Will a HEI fit in a 92? I'd like to build a 434 and put around 600rwhp to the ground. Thanks for info and your time Scott.

Hey Jessie, great video. I've been following your progress for a while and I am really impressed. I have an 84 that I race and am thinking of putting in a 12 gallon fuel cell. Could you tell me which one you used and how it is mounted. Thanks, Willie

Jesse,
A few years ago, you did a custom chip for my 85 with mods. I assume you are still doing re-tunes on the chips for free ( that was the deal when I bought it). I did a dyno run with A/F ration and the car is running rich. I'm watining on the data files via e-mail, but I would like to send you the chip for re-tune, or I could send you the $5 OR $10 to cover a new chip and just re-map my data file (if you still have it). Let me know the best way to proceed.

Raymond Drake
Virginia Beach
CF Forum ID: tomcat_pilot