CorvetteForum - Chevrolet Corvette Forum Discussion
Page 11 of 17
« First
9
10
11
12
13
Last »
Show 100 post(s) from this thread on one page

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 General (https://www.corvetteforum.com/forums/c5-general-103/)
-   -   Corvette C5 3D Raised Steering Wheel Emblems Available (https://www.corvetteforum.com/forums/c5-general/2276722-corvette-c5-3d-raised-steering-wheel-emblems-available.html)

Vette Works Intl 05-11-2010 06:00 PM
He guys,

Got a restock of steering wheel emblems in the other day,but they are going fast!

Bryan

ebnavy11 05-11-2010 10:03 PM
My question is, I have years of protectant in this area. How well will it adhere? Is there anything I must do as far as prep. Maybe a dumb question but I don't want to pay forty bucks and the decal wont stick. I think it looks nice and want to buy one.

Vette Works Intl 05-11-2010 10:18 PM
Originally Posted by ebnavy11 (Post 1574044112)
My question is, I have years of protectant in this area. How well will it adhere? Is there anything I must do as far as prep. Maybe a dumb question but I don't want to pay forty bucks and the decal wont stick. I think it looks nice and want to buy one.
The Emblems have a 3M adhesive on the back and our much more forgiving than the flat vinyl type you see other places. All you really need to do is clean the area good with soap and water..and if a peice of scotch tape sticks you know the 3M adhesive will stick. Also you can't ruin the emblem..it wount stretch our curl up like the flat ones do. You could have it on your car for 5 years peel it of..give it to a friend have them buy a tube of 3M plastic emblem adhesive to put on the back..then he could have it on his car for 5 years!!! They are really great 3D decals..many on the forum will agree!

Vette Works Intl 05-27-2010 02:28 PM
ttt

JETZ 05-28-2010 12:35 AM
Clean the area throughly with Qtips soaked in 'denatured alchohol'.

Originally Posted by ebnavy11 (Post 1574044112)
My question is, I have years of protectant in this area. How well will it adhere? Is there anything I must do as far as prep. Maybe a dumb question but I don't want to pay forty bucks and the decal wont stick. I think it looks nice and want to buy one.

vette54728702 06-05-2010 07:34 AM
Do you have any of these left ?

Vette Works Intl 06-05-2010 04:21 PM
Yes we have many instock! What color do you need?

~Bryan

killain 06-05-2010 07:27 PM
Originally Posted by Vette Works Intl (Post 1570229190)
That is The owner of Cyberdines Ex wife selling off all of Alex's stuff notice all the yardsale bargian prices on how to play the keyboard videos and books, and all of Alex's poor air plane collection. The only thing I can think is she has some emblems laying around.I contacted her to try and see if she could get in touch with Alex she even tooked down a refill order and said she had talked to him? last I heard from her! You'd figure if she could have filled that restock order she would have,and made herself some money.This isn't like Alex his had a rough time before..bad... luck and he always calls me..when he was in the hospital when he was in a car crash he called me. I don't know what to say?
I'm sure the owner, Alex, has some personal problems. But I bought a full set of 50th Anniversary emblems from the auction site, But the sill emblems came from his wife, and the dash letters and steering wheel emblem from the auction site. I just got it 10 days ago, so they must be in some sort of operational status. He's got a Very good product, but can't seem to get all the loose ends together. :sadangel:

killain 06-05-2010 07:49 PM
Originally Posted by O4-/-C5 (Post 1570249265)
I am getting ready to install my insert.
Is there any movement ability with the sticky tape or do you have to get it right the first time?
Is there any trick to making sure I get the install exactly right.
Yeah, I used a 3M product #4298 adhesion promoter www.bondprousa.com and this stuff works wonders. it comes in a 0.5 oz pen and you just have to clean the area, then use the 3M promoter pen and apply the emblem. But once it's down, it's like it's welded to the surface. Super product ! Emblems are really a stand out. Looks like something GM would have done.

Vette Works Intl 06-05-2010 08:58 PM
Originally Posted by killain (Post 1574297664)
I'm sure the owner, Alex, has some personal problems. But I bought a full set of 50th Anniversary emblems from the auction site, But the sill emblems came from his wife, and the dash letters and steering wheel emblem from the auction site. I just got it 10 days ago, so they must be in some sort of operational status. He's got a Very good product, but can't seem to get all the loose ends together. :sadangel:
Yes Alex's ex wife is selling off all her stock. We are Alex's biggest vendor and carry the largest selection of his product some item also that he makes exclusively for us. He is trying to get things going again and for know only has ebay auctions for some of his inserts. We are in direct contact with him and he will drop ship it if we don't have it instock.

Thanks,
Bryan

harleyfullmoon 09-14-2010 07:06 AM
W.T.B. Steering Wheel Emblem
 
I would like to get a black one for my car. Do you have the emblem that people put above the word in the center of the back of the bumper? I saw this at Carlisle this year and it looked sharp.Thanks Harleyfullmoon 1-434-548-1832 sledsmc@comcast.net

Vette Works Intl 11-29-2010 10:15 PM
Hey Guys,

We got a small restock in..these will be gone by weeks end easy. we basically got 5 of every color in including 5oth's and Lemans Comm in the steering wheels. We also got 5 of every color of dash letters. The only thing we didn't get was brushed Alum becuase it is disc and carbon fiber look.

:cheers:
Bryan

robsc501 11-29-2010 11:28 PM
Hi Bryan,
I attached the gold foil decal to air bag. Looks really nice against a black background.
Great item
robsc501

arkus 11-30-2010 12:25 AM
Do you have them in black for the door sills ?

Vette Works Intl 12-02-2010 11:40 AM
We are out of Black door sills at the moment.

arkus 12-02-2010 11:48 AM
Can it be drop shipped ?

arkus 12-02-2010 11:52 AM
Originally Posted by Vette Works Intl (Post 1574298353)
We are in direct contact with him and he will drop ship it if we don't have it instock.

Thanks,
Bryan
That's why I asked

C5ZOH6 01-22-2011 01:31 AM
decal wanted
 
Is this decal avaliable? I would really like to get one but i cant find it anywhere.

http://i1135.photobucket.com/albums/...rior5wheel.jpg

FRED HAMBLE 01-22-2011 01:27 PM
Originally Posted by C5ZOH6 (Post 1576581455)
Is this decal avaliable? I would really like to get one but i cant find it anywhere.

http://i1135.photobucket.com/albums/...rior5wheel.jpg
Call Byran directly he will be glad to help out. 1 813 766 2181 Great guy to deal with!!!
Very busy so be patient if U don't get him right away. If U leave a call back number he will call U.

Fred

putsvet 01-22-2011 06:52 PM
Looks nice but $30 bucks probably after shipping for a 3d sticker??

I agree, I can get em anywhere cheaper than that, don't forum members get a break?

Put


All times are GMT -4. The time now is 11:44 PM.
Page 11 of 17
« First
9
10
11
12
13
Last »
Show 100 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands