I purchased a complete drag pack and sway bars from you guys before you closed your doors. A couple weeks after I received my parts one of the front shocks started leaking oil and you guys replaced it. Now one of my rear shocks is leaking oil and I have no idea what to do. I also have a Pfadt Trans mount with a bad bushing. These parts are new and the shocks where expensive. Is there anything I can do with this leaking shock?

Hello. I have a 2007 C6 Corvette. It's not a Z06 but I have installed a wide body kit on similar to the Grand Sport which I very much like.
I want to have front and rear tow hooks installed on it.
Do you have tow hooks that are available to install on it.
Please message me back. PS I am from Canada so are you able to ship items like this to me.
Cheers....
Lee

Hello,

Installing headers on a 10' GS and I have some questions:

- The flange on the drivers side doesn't seem to sit flat/flush against the head (I haven't tightened it yet), it seems to bow out a little bit in the middle, will it flatten out when I torque the headers to the heads?

- As I opted for the catless system do I just disconnect both rear O2 sensors (drivers and passenger side) and put the supplied plug in on the rear O2 bung on the passenger side?

- The primary closest to the firewall on the drivers side is touching the steering shaft, (again nothing is tight yet) have you had any issues with rubbing here?

- The black rubber sleeve supplied with the O2 extensions, I take it that it's a heat shield for the O2 extensions? If so it doesn't seem nearly long enough to protect the full length of the extensions on both sides from touching the headers, any suggestions?

Not sure if you guys have any stock left, but really could use a set of shims for the c6z06 camber kit. I'm out of front shims and could use more hardware. Any ideas? Thanks.

Hi there, I am so sorry to hear that you have a temporary setback in your business. I do hope that pfadt will be able to recover and continue the great products and services to the whole entire community. I have a quick question related to pfadt tuning and wondering if by chance you can email me at tambeng@hotmail.com that will be totally awesome. Thank you in advance regardless. Regards: Tambeng

hi, terrible news you guys having to shut down....I am hoping for the best for you and your crew, your products were always top notch....my coil overs are one of the absolute best mods on my c5, I am just wondering what I should be needing long term if anything is available for my coil overs...rebuild kit or any suggestions, let me know. my email is
zr1kid@yahoo.com. any feed back is mucho appreciated...and again I wish you guys the best, I don't know if anybody else made better coil overs for a c5

I need help getting one missing piece for my c5 z06 diff brace helpppppppp please

I have your Johnny O'Connell Stage 1 on my C5 but I do have clanks and pops from the back end when I go up driveways and stop and start. Can you help with the adjustment for this. I was waiting for hotter weather to see if it would stop one the chassis got settled into the new parts, but it hasn't stopped.

My 2004 convertible has magnetic ride control, I need front & rear shocks, I would like a smooth ride on the street, your thread to me suggested your Jhonny O'Connel's, or Featherlight singles, which one is best for me, & what will it do to the mil light, what will I have to do to keep the light off.

Have a 2010 Grandsport. Wondering what the diffrence is going to be with the Jonny O'Connel stage ONE set up. Plan on going to VIR in June with the NCM. Want a package that I can use on the street and track. (mostly street, track maybe once a year if that). This will be my first time tracking the car in June. Also what brake package would you recommend? I was looking at Hawk HP plus with DOT 4.