Go Back   Corvette Forum > C4 Corvettes, 1984 - 1996 > C4 Tech/Performance
Sign in using an external account
Register Forgot Password?
Register Albums Search Today's Posts Mark Forums Read FAQ
Search
C4 Tech/Performance
L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine Sponsored by
J&D Corvette

Welcome to Corvetteforum.com!
Welcome to Corvetteforum.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!


Reply
 
Thread Tools Search this Thread
Old 09-21-2009, 10:09 PM   #1
Gregory VanLare
CF Senior Member
 
Gregory VanLare's Avatar
 
Member Since: Dec 2000
Location: Farmington NY
Default Catalytic Converter Clogged??

My 85 has been running rough, I changed the plugs, wires, rotor, distributor cap, it runs better but now it has way over heated. 240, and after I shut it down (this was after 6 mile drive) the radiator started to gurgle, overflow filled up etc.

I timed it and think it should be in good shape. The only change is that it's now getting louder when I drive it. Could this be the catalytic converter being clogged?

It idles well but just dogs out when I step on it. fuel pressure is 42, injectors are relatively new but cleaned anyway. Done a ton to it but it doesn't seem to fix it. Now I've thought that maybe the exhaust is not getting out. would this cause the over heating?

Oh, I replaced the water pump last winter and the fan too!.

Sorry to ramble on, it's late and I'm frustrated, been working on it for a couple weeks!
Gregory VanLare is offline   Reply With Quote
Old 09-21-2009, 10:45 PM   #2
radhunter
CF Member
 
radhunter's Avatar
 
Member Since: Jul 2003
Location: Andrews TX
Default

Very definitely could be clogged CAT. My 1988 C4 pre-CATs disintegrated and clogged my primary CAT right in the middle of the Apache Reservation in AZ (like no where with no service, no cell phone, and not even any Highway Patrol).

Lost power eventually to the point of not being able to make it up hills. Overheated badly. Kept stopping letting it cool down for another run. Finally couldn't make it up a hill, hitched a ride to the Casino, and eventually got a tow to Globe, AZ.
radhunter is offline   Reply With Quote
Old 09-22-2009, 11:26 AM   #3
0Paul Ruggeri
Former Vendor
 
Member Since: Nov 2006
Location: Carmichael ca
Default

Put your hand by the exhaust and have someone rev the engine. If there isn't an increase in air coming out, then the converter is clogged.
Paul Ruggeri is offline   Reply With Quote
Old 09-22-2009, 12:14 PM   #4
runner140*
CF Senior Member
Support Corvetteforum!
 
runner140*'s Avatar
 
Member Since: Mar 2004
Location: Ft. Lauderdale Fl
Default

Gregg, if it still runs, after 20 minutes or so, pop the hood and see it you get a red glowing of the headers and that area. Pull it into a dark garage for this test.
runner140* is offline   Reply With Quote
Old 09-22-2009, 01:27 PM   #5
Pwnage1337
Tech Contributor

 
Pwnage1337's Avatar
 
Member Since: Oct 2008
Location: Amherst Junction Wi
Send a message via MSN to Pwnage1337
Default

Gut it. I gutted mine and you could feel the increase in power. The exhaust also got a little bit louder, which kicks ***.
Pwnage1337 is offline   Reply With Quote
Old 09-22-2009, 01:50 PM   #6
radstringz
Junior Member

 
radstringz's Avatar
 
Member Since: Mar 2009
Location: Berwick Pennsylvania
Default

Seems to me that an increase in exhaust back-pressure would be accompanied by a decrease in intake manifold vacuum. Do you have a gauge to measure vacuum? Anybody have any numbers for comparison?

BTW, is there a way to gut the precats without cutting into the main tubes? There's that bend to contend with...

jr
radstringz is offline   Reply With Quote
Old 09-22-2009, 05:50 PM   #7
C4forfun
Junior Member
 
C4forfun's Avatar
 
Member Since: Sep 2007
Location: Deepest Darkest Northest San Diego
Default

"Seems to me that an increase in exhaust back-pressure would be accompanied by a decrease in intake manifold vacuum. Do you have a gauge to measure vacuum? Anybody have any numbers for comparison?"

I think you're on the right track. I just went through this two weeks ago, and noticed a substantial increase in needed brake pedal pressure to actuate the brakes, which could indicate a lack of vacuum. Once I gutted the cat, all other symptoms including increased brake pedal pressure immediately disappeared.

My other symptoms included an unwillingness to rev freely which worsened as the car got hotter, higher than normal engine operating temps, a hissing sound (I have no idea why), high fuel consumption, and waaay down on horsepower. I don't know the correct way to test it while on the car (I suspect vacuum), but after removing the cat and starting it up as a test, it instantly revved freely and ran like a completely different car. After gutting it and re-installing it, I can say that the car really runs well and gets great mileage. I'm going to buy a new cat to keep it legal, but what a huge difference in eliminating that 19 year old cat with over 90k miles on it.
C4forfun is offline   Reply With Quote
Old 09-22-2009, 09:56 PM   #8
pletzvet
CF Senior Member
 
pletzvet's Avatar
 
Member Since: Nov 2005
Location: North Bay Ontario
Default

I hope for your sake (i.e. $$$) that the cause of your rough running, poor performance and high temps is a clogged cat, but I'd be suspecting something else with the high temps and gurgling coolant. Check for white smoke at the exhaust, moisture at the exhaust tips, and a possible sweet smell of coolant at the exhaust - maybe a head gasket or intake gasket. Also, if there is a coolant problem happening, check your thermostat - it might be stuck closed and this will cause an overheat/boil over condition pretty fast.
pletzvet is offline   Reply With Quote
Old 09-22-2009, 09:56 PM
 
Go Back   Corvette Forum > C4 Corvettes, 1984 - 1996 > C4 Tech/Performance
Reload this Page Catalytic Converter Clogged??
Reply

Tags
1984, 94, c4, catalytic, clogged, converter, corvette, horsepower, increase, l98, overheating, remove, removing, rough, running, symptoms


Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Catalytic converter is fried DrValidus C5 General 12 02-22-2005 05:52 PM
taking off the catalytic converter ftorsell C5 Forced Induction/Nitrous 15 10-06-2003 09:57 PM
Catalytic converter - how to test? Putter C4 Tech/Performance 15 10-13-2002 08:05 AM
Clogged Catalytic Converter? bl75vette C3 Tech/Performance 12 07-10-2002 04:50 PM
Can you just "hollow out" a catalytic converter with a broomstick? gray84 C4 Tech/Performance 9 02-16-2002 02:51 AM
How many horses do you get out of removing Catalytic Converter?? gray84 C4 Tech/Performance 14 02-03-2002 12:45 AM


All times are GMT -4. The time now is 12:59 AM.


Emails & Password Backup