U DREM 2

Change oil light on. What does this mean? Just had my oil changed last week.

Thanks for your help

markKlein

It means you didn't reset the oil light when you had it changed. The instructions are in the owners manual, and posted in a sticky at the top of the C4 General section.

Sorry, I lied. The sticky is in the C4 Tech section. Anyway, here is what you do:

1. Turn the key to RUN, but don’t start the engine.

2. Press ENG MET on the Trip Monitor. Then, within
five seconds, press it again.

3. Witbin five seconds, press and hold GAUGES on the
Trip’Monitor. The CHANGE OIL light should flash.

4. Hold the GAUGES button until the CHANGE OIL
light stops flashing and goes out. This should take
about ten seconds.

When the light goes out, the monitor is reset. If the
monitor doesn’t reset, turn the ignition off, then try
again.

Goldcylon

Just reset the light. Which the key in the run postion but not running hit the ENG/MET button twice within a couple seconds of each other. Then press and hold the gaugues button until it flashes and turns off.

ch@0s

You need to reset your oil light
Pete made a video its in the stickies at the top of this forum.

PLRX

http://forums.corvetteforum.com/c4-t...oil-light.html

U DREM 2

Thanks all on road trip

RollaMo-LT4

You didn't list the year of your car.
So, follow Mark's instructions and you might need to replace "Gauges" with "Range" button.

RANGE button (1990-1991)
GAUGES button (1992-1996) on the Trip Monitor

PLRX

Well his profile shows a C6, but he posted in here.

RollaMo-LT4

Oh, that's funny.

chief bob